# Monzero v1.3.2 release notes Release label: v1.3.2 Monzero v1.3.2 is a Linux wallet update for the DEX. It changes no consensus rule: the chain, blocks, coins, wallets, seeds and addresses are the same as in v1.0.0 to v1.3.1, and **nobody has to upgrade to stay on the network**. ## What is new - **XMZ/USDT.** Two new markets on the Exchange page: **USDT (SOL)**, Tether on Solana (SPL), and **USDT (BNB)**, Tether on BNB Smart Chain (BEP-20). Pay in USDT, or sell XMZ for USDT, with the same atomic swaps as the other pairs. **Network fees are paid in USDT**: the project's relays pay the Solana or BNB Smart Chain fee and take a small USDT fee instead (on Solana about 0.5 USDT to buy, most of it coming back as SOL after the trade, and about 0.2 USDT from what you receive when you sell; on BNB Smart Chain about 0.05 to 0.2 USDT when you sell). On Solana neither side needs SOL; on BNB Smart Chain a buyer still needs a little BNB. If no relay answers, the wallet asks for a little SOL or BNB instead. There is no ERC-20 USDT on Ethereum (its fees are too high). Each USDT market opens when its signed limits document is published. - **Keep open.** An order can renew itself: shortly before it expires the wallet posts it again at the same price for the same time, while the wallet runs. Switch it on in the order form, or with "Keep open" on an open order. - **Orders you can no longer fill are withdrawn.** If the coins behind an open order are spent or moved, the wallet takes the order off the board and refuses anyone who tries to take it, instead of letting a buyer lock coins for nothing. - **Fixed:** orders open longer than a day (a week, a month, custom) could not be posted from the Exchange page ("The offer could not be posted now"). They can now, up to 31 days. ## Before you trade - The swap programs and contracts are open source and were tested with real funds on each open pair, but they have **not been independently audited**. Trade amounts you can afford to lose. - Trades stay inside the limits of the project's signed control documents (about $25 per trade and $250 a day per pair while the DEX opens; 25 USDT and 250 USDT on the USDT markets). - Keep the wallet open until a trade is finished. If it closes, open it again: the trade resumes, or refunds after its time limit. See https://monzero.org/dex/recovery/. ## Packaged platforms | Package | Intended compatibility scope | | --- | --- | | Linux x86-64 wallet (GUI), node and tools | 64-bit PC, glibc 2.35 or newer (Ubuntu 22.04, Debian 12 and later), X11 or XWayland | | Complete source | Exact repository commit and recursive pinned submodules | The DEX helper programs are the v1.1.0 ones except `monzero-dex-evm-helper`, rebuilt from `gui/dex-contracts/engine` in the complete source. ## Upgrading Close the old wallet, unpack v1.3.2 and start it; it uses the same wallet files, node data, trading keys and trading wallet. Finish or refund a running trade first. --- # Monzero v1.3.1 release notes Release label: v1.3.1 Monzero v1.3.1 is a Linux wallet fix release for the DEX. It changes no consensus rule: the chain, blocks, coins, wallets, seeds and addresses are the same as in v1.0.0 to v1.3.0, and **nobody has to upgrade to stay on the network**. ## What is new - **Sell XMZ for SOL or BNB without holding any first.** The buyer's wallet now pays the small network fee you need to collect your coins (about 0.0015 SOL; a fraction of a cent on BNB Smart Chain), and sends it only after your XMZ is locked. If the buyer runs an older wallet that does not send it, your wallet asks you to pay that fee in to collect; if you do not, the buyer's coins go back to them after the time limit and your XMZ comes back to you. On Ethereum each side still pays its own fees. - **Clearer trade limits.** An order above the opening limits now says so on the order form before you post it, with the limit in the coin you trade (for example "0.33 SOL per trade"). On the SOL pair the message wrongly named Litecoin; it now names SOL. ## Before you trade - The swap programs and contracts are open source and were tested with real funds on each open pair, but they have **not been independently audited**. Trade amounts you can afford to lose. - Trades stay inside the limits of the project's signed control document (about $25 per trade and $250 a day per pair while the DEX opens). - Keep the wallet open until a trade is finished. If it closes, open it again: the trade resumes, or refunds after its time limit. See https://monzero.org/dex/recovery/. ## Packaged platforms | Package | Intended compatibility scope | | --- | --- | | Linux x86-64 wallet (GUI), node and tools | 64-bit PC, glibc 2.35 or newer (Ubuntu 22.04, Debian 12 and later), X11 or XWayland | | Complete source | Exact repository commit and recursive pinned submodules | The DEX helper programs are the v1.1.0 ones except `monzero-dex-evm-helper`, rebuilt from `gui/dex-contracts/engine` in the complete source. ## Upgrading Close the old wallet, unpack v1.3.1 and start it; it uses the same wallet files, node data, trading keys and trading wallet. Finish or refund a running trade first. --- # Monzero v1.3.0 release notes Release label: v1.3.0 Monzero v1.3.0 is a Linux wallet update. It changes no consensus rule: the chain, blocks, coins, wallets, seeds and addresses are the same as in v1.0.0 to v1.2.0, and **nobody has to upgrade to stay on the network**. ## What is new - **Offers that stay open longer.** On the Exchange page a limit order can stay open for 1 hour, 6 hours, a day, a week, a month, or a custom number of hours or days (up to 31 days). The review shows when it ends. An offer is answered only while your wallet runs, so keep it running when you can. The DEX page offers the same choices with this wallet. - **Your own look.** Settings > Layout > Appearance: six ready-made colour sets (Monzero, Ocean, Sunset, Forest, Violet, Mono) or any of twelve colours by hand, and a picture of your choice on the wallet card, darkened as much as you like so the balance stays readable. One click returns to the standard look. - **Partial fills.** The project's liquidity offers can now be taken in parts from 50 XMZ; this wallet takes and posts partial offers as in v1.2.0. Offers open longer than a day are written in the newer offer format; wallets from before v1.2.0 never see them. They need the updated relays, which the project runs. ## Before you trade - The swap programs and contracts are open source and were tested with real funds on each open pair, but they have **not been independently audited**. Trade amounts you can afford to lose. - Trades stay inside the limits of the project's signed control document. A long-lived offer can be taken only while a valid document is published. - Keep the wallet open until a trade is finished. If it closes, open it again: the trade resumes, or refunds after its time limit. See https://monzero.org/dex/recovery/. ## Packaged platforms | Package | Intended compatibility scope | | --- | --- | | Linux x86-64 wallet (GUI), node and tools | 64-bit PC, glibc 2.35 or newer (Ubuntu 22.04, Debian 12 and later), X11 or XWayland | | Complete source | Exact repository commit and recursive pinned submodules | The DEX helper programs are the v1.1.0 ones except `monzero-dex-evm-helper`, rebuilt from `gui/dex-contracts/engine` in the complete source. ## Upgrading Close the old wallet, unpack v1.3.0 and start it; it uses the same wallet files, node data, trading keys and trading wallet. Coming from a separate folder, the Exchange page asks once to let this copy's key helper take over. Finish or refund a running trade first. --- # Monzero v1.2.0 release notes Release label: v1.2.0 Monzero v1.2.0 puts a full exchange inside the Linux wallet. It changes no consensus rule: the chain, blocks, coins, wallets, seeds and addresses are the same as in v1.0.0 and v1.1.0, and **nobody has to upgrade to stay on the network**. Upgrade if you want to trade from the wallet. ## What is new - **Exchange page in the Linux wallet.** A new "Exchange" entry trades XMZ against **ETH, BNB and SOL** without opening the DEX website: pair tabs with the last price and 24 h change, a price chart (candles or line, 1H/4H/1D, volume, best bid and ask), an order book with depth, and a buy/sell form. - **Market and limit orders.** A market order takes the best offer that fills your amount now; a limit order posts your own offer at your price for 1 to 24 hours. Every order is shown in plain words before it is sent, and each swap still asks for your approval before anything is locked. - **Partial fills.** Offers may allow any part from a smallest amount; the wallet can take part of such an offer, and post its own with partial fills allowed. The rest stays on offer. - **Your orders and funds on one page.** Open offers (with cancel), the running trade, recent market trades, the trading wallet (move XMZ in and out) and each coin's trade account (deposit address with QR code, and withdraw to your own wallet). - The DEX website keeps working with this wallet as before. The price chart, recent trades, balances and USD estimates are read from the open relays, the chains' public RPC nodes the swaps already use, and monzero.org. The wallet's screens still cannot reach the network themselves. ## Before you trade - The swap programs and contracts are open source and were tested with real funds on each open pair, but they have **not been independently audited**. Trade amounts you can afford to lose. - Trades stay inside the limits of the project's signed control document, as in v1.1.0. - Keep the wallet open until a trade is finished. If it closes, open it again: the trade resumes, or refunds after its time limit. See https://monzero.org/dex/recovery/. - Do not leave coins in the trading accounts longer than needed: withdraw them from Funds. ## Packaged platforms | Package | Intended compatibility scope | | --- | --- | | Linux x86-64 wallet (GUI), node and tools | 64-bit PC, glibc 2.35 or newer (Ubuntu 22.04, Debian 12 and later), X11 or XWayland | | Complete source | Exact repository commit and recursive pinned submodules | The DEX helper programs are the v1.1.0 ones except `monzero-dex-evm-helper`, rebuilt for partial offers from `gui/dex-contracts/engine` in the complete source. Other platforms keep their earlier packages; the in-wallet exchange is for Linux. ## Upgrading Replace the v1.1.0 files with the v1.2.0 ones, or unpack v1.2.0 next to them; both use the same wallet files, node data, trading keys and trading wallet. Finish or refund a running trade first. --- # Monzero v1.1.0 release notes Release label: v1.1.0 Monzero v1.1.0 is the first release whose wallet can trade on the Monzero DEX. It changes no consensus rule: the chain, blocks, coins, wallets, seeds and addresses are the same as in v1.0.0, and **nobody has to upgrade to stay on the network**. Upgrade if you want to trade. ## What is new - **Trading from the DEX page.** With the wallet open on your computer, the page at https://monzero.org/dex/ can post and take offers for XMZ against **ETH, BNB and SOL**. The page is only the screen: MetaMask (ETH, BNB) or Phantom (SOL) pays the other coin in, and the wallet holds the XMZ, runs the atomic swap and asks you to approve each step. - **Prompts, not a trading page.** The wallet shows a prompt when the page asks to connect (compare the code), when it needs your trading password, when a trade needs your approval, and when XMZ is to move into or out of the trading wallet. - **Trading keys and a trading wallet.** The first connection asks for a new trading password. It protects the trading keys, which are separate from your main wallet's keys. XMZ you want to trade is moved to the wallet's own trading wallet with "Add XMZ" and back with "Move back"; your main wallet's keys are never used by the page. - **Limits while the DEX is new.** The wallet starts a new trade only inside the limits of a control document signed by the project (per trade and per day, per network), fetched from monzero.org and checked against a key compiled into the wallet. Without a valid document no new trade starts. A trade that has started always finishes or refunds, whatever the document says. - **Offers through open relays.** Signed offers are published to relays anyone can run (`relay1.monzero.org`, `relay2.monzero.org`). A relay cannot forge or alter an offer. Not in this release: Bitcoin and Litecoin trading (being finished), trading from the Android wallet, and an in-wallet order book. ## Before you trade - The swap programs and contracts are open source and were tested with real funds on each open pair, but they have **not been independently audited**. Trade amounts you can afford to lose. - Keep the wallet open until a trade is finished. If it closes, open it again: the trade resumes, or refunds after its time limit. See https://monzero.org/dex/recovery/. - Do not leave coins in the trading accounts. The trading keys are stored on this computer, protected by your trading password, and this release does not show recovery words for them. After a trade, send the other coin back to MetaMask or Phantom and move XMZ back to your wallet. ## Packaged platforms | Package | Intended compatibility scope | | --- | --- | | Linux x86-64 wallet (GUI), node and tools | 64-bit PC, glibc 2.35 or newer (Ubuntu 22.04, Debian 12 and later), X11 or XWayland | | Complete source | Exact repository commit and recursive pinned submodules | | DEX helper source | The adapted swap engine the bundled helper programs are built from (GPL-3.0) | The Linux package contains the graphical wallet, `monzerod`, the command-line wallet, wallet RPC and, in `monzero-dex/` and `monzero-light/`, three helper programs the wallet runs for swaps. The wallet runs a helper only if its SHA-256 matches the value compiled into the wallet. Other platforms keep their v1.0.0 packages, which cannot trade. ## Upgrading Replace the v1.0.0 files with the v1.1.0 ones, or unpack v1.1.0 next to them; both use the same wallet files and node data. See `UPGRADE.md`. --- # Monzero v1.0.0 release notes Monzero v1.0.0 is the first stable release. It continues the same chain as the Genesis pre10–pre16 prereleases: no reset, no new genesis block, and every existing block, coin and wallet stays valid. It schedules one consensus change, a hard fork to a faster difficulty algorithm at block **21,000**. **Every node operator must upgrade before block 21,000.** This includes solo miners, pool operators, exchanges, explorers, and anyone running their own `monzerod`. A node still running pre16 or older stops following the main chain at that block. **Every wallet must also be updated to v1.0.0 before block 21,000** (GUI, CLI and wallet RPC), including wallets that use a public node. A pre16 wallet checks each block's version against its own fork table and stops syncing at the first version-17 block with "Unexpected hard fork version v17". No coins are at risk: open the same wallet file, or restore the same seed, in v1.0.0 and it syncs normally. Miners on a pool need to do nothing; their payout address and balance do not change. ## Packaged platforms | Package | Intended compatibility scope | | --- | --- | | Linux x86-64 CLI | glibc 2.35 or newer (verified on Ubuntu 24.04) | | Windows x64 CLI | 64-bit Windows command-line environment | | Windows x64 GUI | 64-bit Windows graphical environment | | Complete source | Exact repository commit and recursive pinned submodules | The binary archives contain `monzerod`, the command-line wallet and wallet RPC. The GUI is distributed separately with matching core tools. macOS, Linux ARM, Windows ARM, mobile platforms and 32-bit systems are not covered by this release. ## Consensus change: LWMA difficulty from block 21,000 (hard fork 17) Until now Monzero used Monero's original difficulty rule, which averages 720 blocks and ignores the newest 15. It suits a network with large, steady hash power, but it follows a big change slowly: about 670 blocks after the hash rate rises or falls a hundredfold. On Monzero this meant blocks every ~57 seconds for a day and a half after the pool opened (issuing coins twice as fast as planned), and gaps of up to ten hours when large miners left. From block 21,000 the next block's difficulty is LWMA-1 (zawy12), a linearly weighted average of the newest 60 solve times, as used by many CryptoNote coins: - Difficulty settles within about 106 blocks after a hundredfold rise in hash rate and 145 blocks after a hundredfold fall, instead of about 670. - A solve time out of order counts as one second, and any single solve time counts as at most six target block times, so bad timestamps cannot swing difficulty far. - From the same block, a block's timestamp may be at most 360 seconds ahead of a node's clock (previously two hours), so a block cannot claim a far-future time to lower difficulty. **Keep node clocks synchronized (NTP).** Unchanged: the 120-second target, RandomX proof of work, the emission curve, the 3.26 XMZ tail emission, address formats, ports and network identity. The Monzero Assets research feature moves from hard fork 17 to 18 and remains unscheduled on every public network. ## Other changes since Genesis pre16 - The core reports version `1.0.0` (previously Monero's base version `0.18.5.1`), and packages are named `monzero-v1.0.0-…`. - All changes listed for Genesis pre16 are included, including the wallet fix for unmixable early outputs. ## Verification performed - All 23 `ctest` suites pass on the Linux release workstation, run serially on 17 October 2026, including `core_tests` (full consensus replay, 2,141 seconds), `functional_tests_rpc` (18 of 18), `functional_tests_assets`, `check_missing_rpc_methods`, `unit_tests`, and the RandomX, hash-family, difficulty and block-weight suites. - `unit_tests` runs 1,324 tests: 1,322 pass and 2 hardware-dependent `is_hdd` tests are skipped. Tests that need local ports or the internet were run where those were available (an isolated network namespace for port-bound tests, the normal network for DNS tests); the `mining` functional test used its fixed timeouts (`MINING_NO_MEASUREMENT`) because the workstation was also mining. - New unit tests cover the LWMA rule: steady difficulty at a constant hash rate, settling after hundredfold rises and falls (and the old rule's slower response), out-of-order and far-future timestamps, empty windows, the version-17 switch, the 360-second limit and the protected fork schedule. - On Monzero's private test network, two upgraded nodes mined through the fork at block 1,345. Every block from the fork on had version 17 and exactly the difficulty an independent LWMA calculation gives. A third node left on pre16 stopped at block 1,345 and did not follow the upgraded chain, as an un-upgraded node will on mainnet. - Release testing found and fixed one v1.0.0 issue: the daemon's version-string check required four-part versions and rejected `1.0.0`. These are source and test-network results. They are not an independent security review; see the limitations below. ## Known limitations and safety notices - Consensus, cryptography and the wider implementation have not been independently audited. Security review continues with public use; report issues privately to `security@monzero.org`. - **A prerelease wallet that had selected the atomic-XMZ display unit cannot be opened**, because that setting was also used by Monero wallets and does not prove the file was created by Monzero. Restore it from its recovery seed. - The wallet file check cannot detect a Monero seed or private keys typed into Monzero's restore options. Never reuse them. - The public network still has limited independent infrastructure and hash power. - Windows SmartScreen may warn until the executables are code-signed. - Never reuse a Monero or other CryptoNote-derived seed, keys, wallet file or data directory with Monzero. ## Upgrade and rollback Read `UPGRADE.md` before replacing binaries, and upgrade before block 21,000. ## Verification and reporting Verify the release signature and compare downloads with the SHA-256 values in the signed release metadata and the adjacent `.sha256` files. Review `BUILD-MANIFEST.txt` or `SOURCE-MANIFEST.txt` inside the archive before use. Report security issues privately to `security@monzero.org`; never include wallet seeds or private keys.